No data found

Close

Categories

Save 16%

919D8101 RE 540/1 Metal Geared Motor 810:1

List price: €21.79
€18.31
(€21.98 UK, incl VAT) You save: €3.48 (16%)
Price in points: 3186 points
1450-055
255 g
2 item(s)
End of Line
+ −
Add to wish list

MFA Como Drills 919D8101

Output @ 4.5V 8rpm
Output @ 6V 10rpm, 95742g/cm at max efficiency, stall torque 542700g/cm
Output @ 9V 15rpm
Output @ 12V 20rpm 125064g/cm at max efficiency, stall torque 810000g/cm
Output @ 15V 25rpm
Note: Figures are theoretical for motor and gearbox combination

 

1450-050 to 056 & 240 to 246 Motor Performance
Nominal Voltage Current (A) Torque (g/cm) Speed (rpm) Efficiency (%) O/P Power (W)
6.0 0.45 0 7500   No Load
6.0 2.1 118.2 6180 59.4 max 7.49
6.0   670 Stall 0   0
12.0 0.52 0 15800   No Load
12.0 2.85 154.4 13360 61.9 max 21.2
12.0   1000 Stall 0   0

.

Customers also bought....

919D30001 RE 540/1 Metal Geared Motor 3000:1
1450-056
919D30001 RE 540/1 Metal Geared Motor 3000:1
€24.33 (€29.20 UK, incl VAT)
1450-056
MFA Como Drills 919D30001 Output @ 4.5V 1.5rpm Output @ 6V 2rpm, 354600g/cm at max efficiency, stall torque 2010000g/cm Output @ 9V 3rpm Output @ 12V...
In Stock
Silver Steel 6mm x 333mm
4426-006
Silver Steel 6mm x 333mm
€3.86 (€4.63 UK, incl VAT)
4426-006
Silver Steel 6mm x 333mm
In Stock
Inline Geared Motor 200:1 6V
1400-035
Inline Geared Motor 200:1 6V
€4.55 (€5.46 UK, incl VAT)
1400-035
A lost cost geared motor with a reduction of 200:1. Works on 3-9V, output speed is approximately 50 rpm at 6V. No load current 120mA at 6V, Torque at 6V...
6 item(s)
End of Line
918D100112/1 RE 280/1 4mm Metal Geared Motor 100:1
1450-043
918D100112/1 RE 280/1 4mm Metal Geared Motor 100:1
€10.83 (€12.99 UK, incl VAT)
1450-043
MFA Como Drills 918D100112/1 Output @ 6V 42rpm Output @ 12V 84rpm, 2500g/cm at max efficiency, stall torque 10000g/cm Output @ 18V 126rpm...
Out of stock
Save 16%
Gear Adaptor 6mm
4607-062
Gear Adaptor 6mm
€7.51 €6.31 (€7.57 UK, incl VAT)
4607-062
This adaptor can provide a means of attaching large gears or custom wheels to small diameter shafts. This model has a 6mm diameter hole in one end which is...
2 item(s)
End of Line