MOD 0.5 steel gears that are narrower than our standard MOD 0.5 range and are pre-tapped 1 x M3 for easy shaft fixing
MOD 0.5, 10 Tooth Steel Model Gear. Note: Hobbed type pinion with cutter run out after the face width length
MOD 0.5, 10 Tooth Steel Model Gear. Note: Hobbed type pinion with cutter run out after the face width length
| Part No. | 4905-010 |
| Code | SSN05/10B |
| Type | B |
| No. of Teeth | 10 |
| Pitch Ø dp | 5 |
| Bore Ø H8 | 2 |
| Hub/Boss Ø dm | 7 |
| Outside Ø de | 6 |
| O/A Width A | 12 |
| Face Width B | 5 |
Every effort is taken to ensure the accuracy of the table data
Design variations and errors although rare may occur